zeroPoints

Sound material is available for AKAI sampler (on CD)
The pianist plays on sampler keyboard and celesta.
The sampler is used and works in the whole piece.

Needed equipment:

1 Sampler AKAI S5000 or S6000, with following options:
- Operating System V2.14
- 128 MB RAM
- Sample Verb II (EB 20) Multi Effects processor
(standard installed in S6000)
- N.B. sampler uses MIDI input A, MIDI channel 1,
Audio outputs 1/2 (L/R)

1 SCSI CD ROM drive + SCSI cable
(for loading data into sampler)
- N.B. AKAI sampler uses half pitch SCSI connector

1 MIDI Masterkeyboard 88 keys, weighted action keyboard, 
has to be connected to the sampler (input A), MIDI channel 1.
- sustain pedal   (Roland DP8, or DP10, or Yamaha FC4)
- 1x MIDI cable [Masterkeyboard to AKAI]

Needed 2 loudspeakers, hanging above the orchestra
- each more than 100 Watt - with good quality in bass range
(low freq.): placed behind the percussionists, about 3-4 m high.

The keyboard player has his/her own level control
on the sampler output and could fix a good sound
during the rehearsals, so sound-control of the hall
is not needed.

Monitoring system for keyboard player

Loading procedure
1. Connect CD-ROM drive to sampler through SCSI cable
2. Switch on CD-Rom drive
3. Insert CD-ROM “ZeroPoints” in CD-ROM drive
4. Switch on sampler
5. Select disk “ZEROPOINTS” from Disk List (Load menu)
6. Load folder “zeroPoints” from CD-ROM (entire folder!)
7. Press “Multi”
8. You should be able to play the keyboard parts of
zeroPoints now

The sounds are distributed by Peter Eötvös Composition Studio
For more information please contact

Peter Eötvös Composition Studio
studio@eotvospeter.com